Crafco Pavement Cutters

Manufacturer:	Crafco
Model Number:	31134 / 31135 / 31136 / 31138 / 31145 / 31149 / 31150
Product Class:	Accessory

Crafco Pavement Cutters  for a Clean Cut

31145 Crafco Wide Hub Cutter
The new wide hub cutter produces a cleaner cut, reduces spalling, eliminates wobble, reduces machine vibration, and creates less pin wear.  Now standard equipment on all new Crafco Routers. 
 
31135 Wide Cut Cutters / 31150 Extended Life Wide Cut Cutter
These cutters provide a cut width that can be adjusted from 1/2 inch to two inches. These cutters have no shoulders allowing a more exact cut width. All cutter blades must be evenly placed for proper balance and must have the proper number of spacers to keep cutters snug. Use on AC pavement or PCCP. Some spalling can be expected.
 
31136 Carbide Cutter / 31149 Extended Life Cutter
Place six spacers on each side for a 1/2 inch wide cut. Stack two cutters side by side with three spacers on each side, or stagger in a 2-1-2-1-2-1 configuration for a 1.3 inch wide cut. You can also use three cutters side-by-side for a two inch wide cut. Always stack or stagger in a balanced manner. These cutters can be used on AC pavement or PCCP. Some spalling can be expected.
 
31138  6 1/2" Carbide Cutter
These cutters are the same as the 31136 cutter except they have an increased cut depth up to two inches. Three cutters are evenly spaced on the cutter head leaving every other pin empty.

Cutter Pins

31114 Cutter Pins
Crafco cutter pins are specifically manufactured to withstand shock and abrasion associated with this machine. Ultra hard on the outside for wear resistance and flexible on the inside. Use only Crafco pins with Crafco cutters. Failure to do so will void all warranties and is dangerous.
 
31151 Extended Life Cutter Pins
Use these pins to gain 20% to 30% more life as compared to the 31114 pin and always use with any extended life cutter. Using excessively worn pins will damage the cutter head.


Available for Sale